This
machine is a small, light
weight, user friendly hot
stamping date coder. It can
be installed for overprinting
text, onto film such as paper,
plastic film. pharmaceutical
paper carton, cellophane,
polypropylene, aluminum, polyester
or cardboard, at speed up
to 150 prints per minute,
on a 20x35mm printing area.
It can be easily installed
VFFS packaging machines. With
a special idle bar, continuous
motion is also installable.
Features:
Light weight and easy loading
foil. 1 to 3 lines print, easy
to adjust. Easy to change types.
Easy to change any printing
direction. Stable built-in temperature
control system. Compact size
makes it easy to install. Operation
under packaging machines. Fully
guarded. Clear print quality.
End of ribbon sensor. Low dispensable
material cost.
Dispensable
material: Hot Foil / Ribbon.
Printing
area: 20mmX35mm
Printing
Speed: 120 prints/min
Ribbon
length: 100~153M.
Character
size: 3mm.
Signal
required: connect signal, photoelectric
sensor or limit switch.
Coder
dimension: 150(H)x220(W)x150(L)mm.
Net
Weight: 9~11 Kg, depends on frame
size.
Power
required: 100/110VAC or 200V~240V
50/60Hz, single phase, 100W.
Air
supply: 4Bar(60psi)
JDA
PACKAGING AND PROCESSING EQUIPMENT 50 Alex Avenue, Unit
1, Woodbridge, Ontario L4L 5X1 Tel:
905 850 6434 Fax: 905 850 6488 E-mail:
info@jdaprogress.com
